3 IN 1 Rack Mount Cage

The SKD27-F2D is a  is designed for stand alone use of SKD271X and SKD272X encoder modulator. It can power up the digital modulator with a 12V 2A adaptor simply by plug in its F connector.

The SKD-26C is a universal chassis and fully compatible with SOUKA’s SKD2681 modulator and those of most other manufacturers. It is capable of holding 16 professional modulators depend on different power supply it works with.

The SKD271X is a cost-effective but professional encoder modulator designed in a compact size. It can convert the HD signal into different digital signal with the resolution of 1080P. With the chassis SKD-M27, it can amount up to 16 pieces and deliver 16 RF signal by 1 RF output port.

The SKD162X is a professional quality agile modulator with 16 output channels in 1RU size. It is SAW filtered and microprocessor controlled with an output capability of 860MHz. Setup and tuning are easy and simple by the front panel. The unit offers high performance, low cost and compact design for the system operators.

The SKD2210H is designed to convert the HD signals to IP SPTS with H.264 encoding. Users can put your HD source on a local network and/or internet with it. In this way, users can see the real-time video on the devices like smart phone, tablet, laptop or TV with the free VLC application or by IPTV receivers.

The SKD-26C is a universal chassis and fully compatible with SOUKA’s SKD2681 modulator and those of most other manufacturers. It is capable of holding 16 professional modulators depend on different power supply it works with.

The SK-16 is a professional quality passive output combiner with 16 input ports. It is applied where the signals from multiple modulators must be combined and distributed over the cable distribution network.

The SKD211X is a high performance and cost-effective modulator. It encodes, multiplexes and modulates the two HD signals into 1 RF signal (DVB-C / DVB-T / ATSC/ QAM / DTMB factory set). The NMS port also can be used as the IP data input port to take in the camera IP signal with ONVIF protocol. The camera IP signals will be modulated into the RF channel as well.