The SKD2220 is built with 4 input transponders to receive ATSC and clear QAM signals and delivers the IP streams over the IP network using streaming protocols like UDP or RTP.It serves as a vital component in IPTV deployments, enabling the seamless conversion and distribution of ATSC signal in IP format.
The SKD7170 is a device that enbles the conversion of DVB-T/T2 and DVB-C signals into IP streams over UDP or RTP protocol.The converted IP streams can be multicast or unicast, enabling the distribution of TV content over IP networks. This device comes with friendly management and control interfaces for users to configure the settings easily.
The SKD7110 is a digital encoder equipped with 8 HD input ports. After encoding, it will output 8 SPTS over UDP or RTP protocols and quickly roll out to your IPTV system, providing a seamless and enjoyable viewing experience for IPTV subscribers.
The SKD7150 is a device used for converting satellite signals from a satellite dish or other satelliate reception equipments into IP streams over UDP or RTP. It can seamlessly integrate with existing IP networks and allow for wider accessibility and reach of satellite TV channels and other mulitimedia content.
The SKD2250 is a small-size streamer,offering 4 tuner ports to receive DVB-S or DVB-S2 signal. It decodes the received signals into IP format over UDP or RTP protocol and stream the content over IP network. The streamer comes with a friendly management interfact that allows operators to control and monitor the process. To meet project requirement, it also can be mounted in the mounting rack and placed right in the cabin.
The SKD2270 is equipped with 4 tuners that receive DVB-T/T2 and DVB-C signals,allowing it to capture digital signal over the air. With its good scalability, this IP streamer is able to handle mulitple channels simultaneously and intergrate the output streams to existing IPTV system.
The SKD2210 is a small and compact streamer that takes 4 HD signals and encodes them into a H.264 compressed format for streaming. It comes with a user-friendly web-based interface, allowing users to configure various encoding parameters like resolution, bitrate and streaming settings.
The SKD710X is SOUKA’s second generation IP to RF modulator, which supports MPTS and SPTS IP inputs with the protocols of UDP and RTP. This modulator comes with one Gigabit IP input port and outputs RF frequencies in 4 or 8. It is extremely easy to use thanks to the built-in intuitive WEB interface.
The SKD2110 is designed to convert the HDMI signals to IP SPTS with H.264 encoding. You can put your HDMI source on a local network and/or internet with it. In this way, you can see your real-time video on the devices like smartphone, tablet, laptop or TV with the free VLC application or by IPTV receivers.
The SKD210X is designed to convert the IP stream over UDP/RTP protocols into the digital RF signal. It is ideal for applications requiring a low-cost and simple solution for IP to cable conversion for local TV system. It is extremely compact with 34MM height and rack mountable.
The SKD211X is a high performance and cost-effective modulator. It encodes, multiplexes and modulates the two HD signals into 1 RF signal (DVB-C / DVB-T / ATSC/ QAM / DTMB factory set). The NMS port also can be used as the IP data input port to take in the camera IP signal with ONVIF protocol. The camera IP signals will be modulated into the RF channel as well.
The SKD27-F2D is a is designed for stand alone use of SKD271X and SKD272X encoder modulator. It can power up the digital modulator with a 12V 2A adaptor simply by plug in its F connector.
The SKD3019 modulator is a frequency agile commercial RF modulator with SAW filter and microprocessor. Unlike traditional analog modulator, it has dual HDMI inputs to take in the 1080P HD signal and outputs an analog signal without noise and or stripes. Any standard HDMI source can be sued, including satellite receivers, Blu-ray and camera.
The SKD-27-3 enables you to fit any SKD271X, SKD272X and SKD296X modulators into a standard 19’’ rack or cabinet. The bracket takes up one rack slot (1RU) with 3 slots for modulators.
The SKD30 is an ultra-compact headend for delivery HDTV content from cable, satellite and IPTV. With up to 16PCS hot-swapped function modules, the SKD30 can easily handle task like receiving, encoding, multiplexing and modulating. Thanks to its rich features, the SKD30 is perfect for CABLE TV and IPTV in hotels, schools, bars and so on.
The SKD201X is the most cost-effective and smallest form factor solution in the market. With the second HDMI output port and a RF loop port, user can easily install the system with different requirements. Extremely compact and wall mountable, the SKD201X fits into any space virtually.
